·         Rosemount Reliability - Designed with same electronics, sensor, and meter body as the 8800.

·         Reduced Cost - Eliminates field assembly and welding of separate reducers and piping reducing installed cost by as much as 50%.

·         Extended Measurable Flow - Low-end flow range is doubled with the Rosemount 8800 Reducer Vortex.

·         Reduced Project Risk - Reducer Vortex and the Traditional Flanged Vortex have the same face-to-facedimension. As a result either meter can be used without affecting pipe layout.

·         Available as flanged meter for 1 through 12 inch stainless steel and nickel alloy C materials of construction.

·         Available with HART® & FOUNDATION™ fieldbus protocols

The Rosemount 8800 Vortex Flowmeters are suitable for liquid, gas, and steam applications. The high performance of the Rosemount 8800 Flowmeters solve your toughest flow applications needs by:

·         Eliminating Clogging associated with impulse lines (and other vortex)

·         Reducing potential leakpoints by using a gasket-free meter body design

·         Using a mass balanced sensor and Adaptive Digital Signal Processing to provide vibration immunity

·         Unique isolated sensor design allows replacement without breaking the process seal

·         Reducer™ Vortex Saves $1121 on Steam Flow Measurement Installation

·         Juice Manufacturer Optimizes Steam Measurements and Reduces Usage with Reducer™ Vortex Technology

·         Paper Mill Improves Quality with Vortex Technology on Supercalender Steam Flow

Key Specifications

Flowmeter Accuracy

± 0.65 % of rate for liquids (±1.00% for line size 6-in (150 mm) and greater)
± 1% of rate for gas and steam (±1.50% for line size 6-in (150 mm) and greater)

Turndown

38:1

Output

·         4-20 mA with HART®

·         4-20 mA with HART® and Scalable Pulse Output

·         FOUNDATION™ fieldbus with 2 Analog Input blocks, 1 Backup Link Active Scheduler function block, and 1 Integrator function block (1 PID function block optional)

Wetted Material

Stainless Steel - 316/316L and CF3M
Nickel Alloy - C-22 and CW2M
Consult factory for other wetted material options

Flange Options

ANSI Class 150 to 900
DIN PN 10 to PN 160
JIS 10K to 40K
Flanges are available in a variety of facings

Operating Temperatures

-330°F to 800°F (-200°C to 427°C)

Line Size 

Flanged - 1-in to 12-in (25 to 300 mm)