Product description
Pressure transmitter with metal sensor
Overload-resistant and function-monitored; Communication via HART, PROFIBUS PA or FOUNDATION Fieldbus
Your benefits
· Very good reproducibility and long-term stability
· High reference accuracy: up to ±0.075%, as PLATINUM version: ±0.05%
· Turn down 100:1, higher on request
· Used for process pressure monitoring up to SIL3, certified according to IEC 61508 by TÜV SÜD
· HistoROM®/M-DAT memory module
· Function-monitored from the measuring cell to the electronics
· Continuous modularity for differential pressure, hydrostatic and pressure (Deltabar S, Deltapilot S, Cerabar S), e.g.
- replaceable display
- universal electronic
· Quick commissioning thanks to quick setup menu
· Menu-guided operation
· Extensive diagnostic functions
Cerabar S PMP71 with MID Parts Certificate:
Pressure transmitter with metal sensors
Overload-resistant and function-monitored; Communication via HART; Subcomponent suitable for custody transfer measurement with NMi approval
Your benefits:
· Very good reproducibility and long-term stability
· High reference accuracy: up to ±0.075%, as PLATINUM version: ±0.05%
· Used for process pressure monitoring up to SIL3, certified to IEC 61508 by TÜV SÜD
· HistoROM®/M-DAT memory module
· Function-monitored from the measuring cell to the electronics
· Quick commissioning with Quick Setup menu
Menu-guided operation
Field of application
The Cerabar S pressure transmitter is used for the following measuring tasks:
· Absolute pressure and gauge pressure in gases, steams or liquids in all areas of process engineering and process measurement technology
· Level, volume or mass measurement in liquids
· High pressure up to 700 bar
· International usage thanks to a wide range of approvals
Cerabar S PMP71 with MID Parts Certificate:
Cerabar S serves as a component of a system suitable for custody transfer measurement, for highly accurate measurement of pressures, and finds application in
custody transfer. It satisfies the applicable requirements in accordance with OIML R117-1 Edition 2007 (E) and EN 12405-1/A1 Edition 2006.
The Parts Certificate is issued on the basis of the following standards:
· WELMEC guide 8.8 "General and Administrative Aspects of the Voluntary System of Modular Evaluation of Measuring instruments under the MID".
· OIML R117-1 Edition 2007 (E) "Dynamic measuring systems for liquids other than water".
· EN 12405-1/A1 Edition 2006 "Gas meters – Conversion devices – Part 1: volume conversion".
The Cerabar S pressure transmitter is used for the following measuring tasks:
· Absolute pressure in gases or liquids in all areas of process engineering and process measurement technology
· International usage thanks to a wide range of approvals
Download Datasheet:
To start your quick quote, please fill out the below form and an China Industry Automation representative will contact you within an hour.
Receive a reply within 30 minutes, when you submit a Quick Quote Request Monday-Friday between 8:30 a.m. and 6:00 p.m. CST. Requests received outside of these hours will receive a reply the next business day.
